Tag Archive Basic maintenance of the packing machine for the decocting machine

The decocting machine maintains a few points:
1 decocting machine brush pot problem: not brush pot this problem is the most common problem, and this problem most likely lead to machine problems are: the speed of decocting medicine will slow, two heating disc is easier to burn, three heating plate bottom connection head will often break, and the cause is that the reason is no clear after decocting medicine. The accumulation of drugs will become thicker and thicker, and slow heat conduction will lead to a series of problems.
2 packaging machine packaging roll scalding problem: this problem is also common, and the cause is also a variety of reasons, roughly divided into the following points: a packaging machine packaging error, not installed in accordance with the training and installation order, so the problem is that the packaging is not homogeneous on both sides, thus the problem of packaging hot and more more and more It is serious. There are dirty things on the roller of two packing machine: there will often appear some medicine juice and a little ironing plastic on the packing shaft, and many people will ignore this problem. It will cause two problems when it is not cleaned up in time: the packing shaft is easy to stick to the packing roll and causes the problem of the knife and the shaft plastic more and more, which causes the bag packing bad, so it is often cleaned up. Packing shaft (recommended to wear gloves with high temperature steel wire ball cleaning, at this time do not roll, remember burns, injuries).
3 packing drug can not stop and do not take medicine: this problem is also easy to appear after a period of time after the machine is used. One packing machine can not stop medicine. Most of this is caused by the plug of the solenoid valve. The solution is to clean up the solenoid valve in the box of the machine box; and it may be a trip. Questions and probe questions (suggested to encounter such problems and timely communic