1>. Operation taboo
1, iron is prohibited.
2. Prohibit the opening and parking of the material.
3. Prohibit super current and low voltage running machine.
4, it is forbidden to continue to operate when the machine has a different noise.
5. Prohibit the machine from checking and adjusting the machine when it runs.
6, the machine is prohibited from eccentric feeding.
7. It is forbidden to enter large pieces of material in the crushing chamber (exceeding the maximum feeding size of the instructions).
2>. Implementation points
1, we must regularly lubricate the jaw bearing bearings, add molybdenum disulfide (high temperature resistant) grease, and oil cycle: 1 times / class. (every class)
2, check and tighten the triangle belt. (every class)
3. Check the wear of the jaw. (every class)
4. Check all bolts and their fasteners. (every class)
5, check the eccentric block of belt pulley and balance wheel must be symmetrical. (every class)
6. During the operation of the equipment, check the vibration caused by the foundation subsidence or the deformation of the steel frame. (weekly)
7. After adjusting the discharge orifice or replacing the jaw plate, the top plate of the thrust plate must be loosened.
