Intelligent gypsum spraying machine

The advantages of the product of the cement mortar spraying machine:
1. basically there is no floor ash, water saving, material saving, low investment and high efficiency, which can reduce the cost by more than 20%.
2. simple operation, no need to take the scaffolding, no mobile equipment, no repair and stubble, yin and yang angle, the roof can be free spray, shorten the time limit, improve the career progress, and save
Expenditure on the overhead of the frame data.
3. fast speed, high efficiency, low labor intensity, a spraying machine can easily spray 100–130 square meters per hour, deduct preparation time, work 8 hours a day, can spray 800.
–1200 more than 15 square meters, a considerable number of skilled workers work hard day.
4. the quality of the project is guaranteed. The main shortcomings of the artificial powder wall and the powder wall machine are that the bond degree of the mortar and the wall and the density of the mortar are not enough. The machine has large flow, high pressure and the density of mortar.
Far exceeding the standards set by the state, it avoids the difficulties and losses caused by quality, construction period and labor cost.
5. one machine and multi use, that is, can spray mortar can also spray fire proof data, refractory material, perlite insulation mortar, thermal insulation mortar, not affected by regional and environmental conditions and the shape of spray surface.


Scope of application:
Putty, coloring agent, varnish, medium high viscosity emulsion paint, oil based coating, chlorinated rubber, epoxy, etc.
Suitable for coating, putty, interior and exterior latex paint, oil paint, high viscosity Bingxi acid coating and some anticorrosive coatings.
.
The machine is easy to operate and convenient to use. It can effectively reduce the heavy strength and labor intensity of the builders’ painting during the construction process. At the same time, it also greatly saves the wages of the workers and greatly improves the working efficiency.  Especially in the construction surface such as wall, roof and so on, it can effectively avoid dropping sprinkled in the routine construction process, and can effectively keep the construction site clean and save the material.


The characteristics of the mortar spraying machine:
1. It has excellent weatherability. Low thermal conductivity, stable thermal insulation, high softening coefficient, resistance to freezing thawing and aging resistance.
2. The soft cracking technology is used. The modulus of elasticity of each layer is matched by gradation, allowing deformation and restriction.
Deformation can be used to disperse and eliminate deformation stress at any time. The basic level deformation is adaptable and effectively prevents cracks on the wall surface.
3. The system has no cavity and strong negative wind pressure resistance. It is suitable for multi-storey and high-rise buildings.
4. Good air permeability and strong respiratory function. It has good waterproof function and can remove moisture from insulation layer.
5, the grade of fire resistance is B1 grade.
6. Construction is convenient. Pre mixed dry mix and lightweight aggregate loading technology can avoid the problem of incorrect weighing on the construction site. The construction speed of multi layer and multi layer is fast.
7, the ability to rectify deviation is strong. It has good adaptability to the construction of flat and not high structure, and can effectively correct the local deviation.
8, the comprehensive cost is low. This machine is an electric screw type high pressure mortar spraying machine, with advanced technology, simple operation and maintenance, and can operate skillfully without special training.
9. The mortar spraying machine produced by our company has no ground ash, water saving and material saving. It can reduce the cost, operate simply, and do not need to take the scaffolding, and do not have to move the equipment.
No need to repair the stubble, the Yin Yang corner and the roof can be sprayed freely, with the advantages of high speed, high efficiency and low labor intensity.
This machine is a screw type high pressure mortar spraying machine with advanced technology. Operation and maintenance are simple, and can be skilful without special training.


A summary of the product of mortar spraying machine
Mortar spraying machine products are mainly used for building inside and outside walls, cement mortar spraying and external wall insulation materials mortar spraying, refractory material spraying.
The mortar spraying machine produced by our company basically has no floor ash, water saving and material saving. It can greatly reduce the cost and operate simply without scaffolding.
Without mobile equipment, no need to repair stubble, Yin Yang corner, roof can be freely sprayed, with fast speed, high efficiency, low labor intensity.
A spray machine can easily spray 150 cubic meters per hour.