A saw blade engraved on a concrete pavement

Road with a series of road concrete saw blade, the industry well-known alloy powder as a matrix formula, upgrading tool life, section type knife head, the road marks no longer need to worry, with the continuous promotion of road construction, carving tools will also continue to upgrade.
Undefined
Points for attention of road concrete saw blade for pavement cutting
1. in the first operation, the slowest speed should be used first.
2. to ensure the supply of cooling water, special water trucks and on-site water storage facilities are required.
The depth of the 3. section is controlled by the limiting wheel installed on the working floor of both sides of the cutter row, and it adjusts the relative distance between the cutter shaft and the road surface. When the diameter of the saw blade is reduced due to the wear of the cutter head, the wheel must be adjusted in time to reduce the shaft height of the saw blade so as to keep the depth of the cutting groove unchanged.
The cutting, cutting, filling and filling of concrete pavement with concrete saw blades.
1. marks: after the initial coagulation of the concrete pavement and reaching 1.2 to 2 Mpa, the print work can be carried out. The surface of the road is deep 0.5cm, the spacing of the lines is 2.7cm, and the width of each row is 40cm, with a special engraving machine.
2. cutting seam: the shrinkage joint of the concrete surface layer, the width of the contraction joint should be adapted to the cutting seam of the slit machine. The cutting method should be used as far as possible. The cutting speed should be slow and fast first.
3. filling and packing: the treatment of expansion joints of road concrete surface often adopts the method of filling filling and prefabricating flexible embedded seams.