Dry cut small sawblade of our dry cut king gives you different cutting experience, extraordinary temperament, dry cutting strength, the value added formula, in the cutting process, sharpness stronger, more handy.
Undefined
Dry cutting requirements for small diamond saw blades:
The structure of the 1. saw blade should be fast. In the dry cutting process, in order to ensure the quality of the workpiece and the life of the tool, the cutting tool can be quickly discharged, so that the heat of the incoming workpiece and the tool is greatly reduced.
The friction coefficient between the 2. chips and the cutting tools should be as small as possible. In dry cutting, the high temperature produced in the cutting area produces chemical instability, the friction between the cutting tool and the chip increases and the chip cutting speed slows down, and it is very easy to produce the chip tumor and aggravate the tool wear. Therefore, the friction coefficient between chip and cutter should be reduced.
3. to have excellent high temperature resistance performance: although in dry cutting, the heat produced in the cutting area can not be completely discharged with the chip, but as long as the cutting tool geometry and cutting parameters are selected reasonably, most of the cutting heat can be discharged with the chip, and good processing effect can be obtained.
Dry cut small saw blade without cutting fluid, save cost, protect the environment, give you different cutting experience, is the current more hot saw blade, but also a big progress in the saw blade technology.
Dry cut king gives you different cutting experiences
The difference between the marble flat and the cast iron
The quality of the quality marble flat gauge is made of “Ji’nan green” Dali stone material, and it is made of marble material based on several hundred years or thousands of geological changes. According to its special material, the marble measuring tool is not deformed, and it will not rust without permanent use. The accuracy is divided into 0,00000. The 000 level high precision marble plane can also be drilled and slotted, and can be customized according to the needs of customers.
Cast iron flat material is generally made of high strength iron, its working face is used to make its flatness to meet the required precision. The advantage of cast iron is that it is used for a long time with no problem for several hundred years, as long as it maintains its plane precision every year. Cast iron is made of high strength cast iron, and it does not damage easily.
Features
1, physical characteristics: specific gravity: 2970 to 3070kg/ compressive strength: 245 ~ 254N/m strong sexual grinding capacity: 1.27 ~ 1.47N/ m linear expansion coefficient: 4.6 x 10~6 degrees of water absorption: 0.13% Shaw strength: HS70 above.
2, marble has long natural aging, its structure is precise, its texture is even, its expansion factor is very small, the internal stress will not exist at all, and it will not deform.
3, rigidity is good, hardness is high, wear coefficient is very strong, so precision maintenance is very good.
4, temperature is not affected, flatness is maintained very well, and there is no need to worry about deformation and accuracy changes due to temperature changes.
5, marble flat feet will not scratch, will not happen to magnetic hair, the detection can smoothly move back and forth, will not occur stagnation and mobility is not flexible.
6, not afraid of acid, caustic fluid erosion, will not rust, maintenance and maintenance is also very simple, long service life.
7. Each marble ruler has a weight reducing hole, so that it can be conveniently taken during the use.
After the above summary, the marble level can not be struck and ground in the plane. Knocking will break the plane. Marble is made of stone. If it is grinded, the cast iron has no way to grind it. Cast iron is to be carefully maintained without coating with rust preventive oil so as not to rust and not be used. The accuracy of cast iron is 1, 2,3.
In the production of cast iron flat ruler, in order to stabilize the size of castings, castings are usually placed at room temperature for a long time before cutting. This measure is also known as artificial aging. But this time limitation does not belong to the process of metal heat treatment.
Cast iron is used as a casting product. According to the principle of casting, the cast iron must have internal stress after completion of cast iron. So it should be placed at a higher temperature or kept at room temperature so that its properties, shapes and sizes vary with time. The aging treatment, called artificial aging treatment, is called natural aging treatment if the workpiece is placed at room temperature or in a long time under natural conditions if the workpiece is heated to a higher temperature and the aging treatment process for a longer time is called artificial aging treatment. The purpose of aging treatment is to eliminate internal stress, stabilize structure and size, and improve mechanical properties.
The use of marble ruler is mainly used for fixing workpieces, which is the basic work for fitter workers to debug equipment, assemble equipment and repair equipment. It is suitable for precision production, precision measurement and precise marking work in mechanical processing and parts manufacturing industry.
Use and function of three dimensional flexible welding platform
Use and function of three dimensional flexible welding platform
According to the different functions of each component, the three dimensional flexible welding platform fixture is divided into 8 categories: working platform, supporting part, positioning piece, adjusting key, pressing piece, locking piece, part and accessories. The following classification is used to introduce the function and use method of each positioning element in the tooling.
The work platform adopts the form of orifice plate. On the top surface and 4 sides of the high precision table, each 100mm has a round hole of 28mm, and a dimension line is divided at the same interval. The edge of the mesa can be with a millimeter scale line. The circular hole on the table can be used to splice various functions of the positioning module and fixture.
The dimensions of the 3D welding platform are from 1000mm * 1000mm to 2000mm * 4000mm, and can be combined into any size worktable as required. Each platform is designed with holes for mounting legs. The number of holes depends on the size and bearing capacity of the platform.
The support feet of the 3D welding platform include standard support feet, universal wheel support feet, fixed support feet, frame structure support and hydraulic lifting support to meet the different needs of customers. This series of elaborate designs provides great convenience to users. T groove plate (T groove platform),
According to customer requirements, the millimeter scale can be described on the two right angles of the platform.
1. general 2D, 3D tooling platform (16, 28 holes):
1. Flatness of tooling platform: less than 0.15mm/1000mm, perpendicularity of plane and side of 3D platform: less than 0.1mm/1000mm
2, the material of the tooling platform: steel parts (low alloy steel Q345), the whole ladder type heat treatment, to eliminate internal stress.
3. The tolerance of the hole distance is within 0.05mm
4. The hole length of the 16 series is 50mm, and the diameter of the series 100mm is 28
2. main auxiliary parts of fixture and fixture:
1, U square box, L square box:
Material: Q345, flatness is less than 0.1mm/1000mm, perpendicularity is less than 0.1/200mm, parallelism is less than 0.10/200mm
2, supporting the corner iron:
Material: Q345 or HT300, flatness is less than 0.1mm/m2, perpendicularity is less than 0.15/200mm, parallelism is less than 0.10/200mm
3, positioning parts: Material: Q345, flatness is less than 0.2mm/m2, perpendicularity is less than 0.15/200mm, parallelism is less than 0.20/200mm
4, angle: Material: Q345, according to the scale accurately positioning 0 to 225 degrees of arbitrary angle, angle adjustment to 0.5 degrees.
5, locking parts: Material: Q345, locking force is more than 1.2T, quenching and tempering treatment HRC32 ~ 35 degrees; steel ball quenching treatment HRC58 ~ 62 degrees.
6, compress: Material: Q345, tempering treatment
Application and processing of hot-melt copper nut
Copper nuts are classified according to the conditions of their embedded nuts, one of which is called hot melt copper nut. As the name suggests, the forming method of hot melt copper nut is the forming of copper nut in the hot melt machine. The material of hot melt copper nut is usually made of C3604 lead-free brass and C3604 quick cut brass as base material.
The way of embedding hot melt copper nut is usually by adding high temperature and hot pressing into the pre-set holes of plastic, and then forming threads through cooling. The hot-melt machine heated the copper to about 90 degrees Celsius, which raised the temperature inside the copper nut and pressed the copper nut into the plastic part. Finally, with the handle pressed, the plastic piece is melted into a copper nut, and a hot melt copper nut is formed.
The volume of hot melt copper nut is generally not large. It is usually used in the field of electronic products.
The working principle of the inlet valve assembly of air compressor
For the screw air compressor, the general rule of intake valve is that the intake valve is electrified and the power failure is unloaded. Sometimes our device has a slightly larger current when it is unloaded, and 22KW has 31A when it is unloaded. It is initially suspected that the intake valve is not strict, because when the gas is not used, the pressure will rise slowly after the machine is unloaded, and sometimes the high pressure alarm stops! And after the shutdown, there are still some residual pressure inside the machine that can not be discharged (around 6 kg), leading to the overloading of the main engine when the machine is started again.
When the screw air compressor inlet valve belongs to the normally open intake valve, the solenoid valve is opened when the screw air compressor is not loaded, and the solenoid valve is closed after the compressor is loaded. When the solenoid valve opens, there will be a gas to close the intake valve, but it can not be completely shut down, and the intake space is kept to maintain the minimum pressure required for the lubrication of the compressor. This pressure is generally 1. 5bar; after the solenoid valve is closed, the compression will enter the normal working state until the working pressure is set, depending on the user. The intake valve has two pipes and emptying one way, and the remaining gas in the valve is released to ensure normal loading of the compressor. When discharging, the current is too large, which indicates that the tank pressure is higher and the inlet valve opening is large. Please adjust the empty screw to ensure that the tank pressure will not be too high.
After the screw air compressor is stopped, the tank pressure can be completely emptied in about 60 seconds, that is, the pressure is 0. And your tank pressure is 6bar, indicating that there is a problem with the vent valve vent pipe: 1. The diameter of the pipe may be too fine; 2. The hole of the combination valve is too small or whether it is clogged or not.
After unloading, the pressure will rise slightly back and forth, but this is only a balance need, and the time is very short. It will not go up to high pressure stop. The high voltage shutdown should be the problem of the solenoid valve of the air compressor. Please check whether it is in good condition and whether it can work normally. No matter what intake valve, the tank pressure should be maintained at 1 during unloading. 0~2. Between 0BAR. Too high for screw air compressor energy is a great waste.
The previous life of hardware tools
You may be the person who sells hardware tools. You may be a hardware tool. You may be a hardware maker, but do you know the previous life of hardware tools?
Tools have a great effect on the progress of human beings. It can be said that tools bring the awakening of human beings. The evolution of human evolution from physiology to tool evolution is the result of natural selection, and it is an inevitable historical process. Human first step into the stone age, at this time the hardware tools are very rough, but already have the embryonic form of hardware tools, everywhere visible stone and animal bones to be the material of hardware tools, at that time the stone hammer, stone blade bone handle knife and so on.
When human beings enter the bronze and iron age, the Bronze Hardware tools have not been greatly developed because of the properties of bronze. The iron tools developed rapidly with their own advantages. In the next few centuries, iron as a raw material for hardware tools has played a great role in the progress of tools, iron hammers, iron wrenches and so on. The development of hardware tools has also opened a new chapter. Now, the materials of hardware tools are becoming more and more diverse, the styles and types of hardware tools are becoming more and more rich, and hardware tools are also divided into manual tools, electric tools and pneumatic tools. More and more materials and carbon materials are used in materials. Hardware tools are also designed to be multi-functional, and the type and style are no longer single.
Every development of tools has increased the power of human progress, and the importance of tools is self-evident. At present, the tool industry is carrying the important task of tool development. Everyone in the tool industry instills blood in its own way for the development of tools. In fact, every person who works conscientiously in the tool industry contributes to the progress of human civilization. We can not know the development of hardware tools in the future, but there will be more breakthroughs.
Some views on Forging Technology
Forging is a method of metal processing. The greatest advantage of this method is that it can increase the performance of the metal at the same time, because in the process of forging, the faults and cracks inside the metal blank are removed. In fact, the degree of the metal particles in the metal is added in the process of forging. In this way, the excess impurities in the metal can be clearly cleared when forging.
Under the condition of modern technology, almost any metal material can be made into forgings or parts by casting. Today, forging accuracy is getting higher and higher. It can reach or even surpass the usual accuracy level of machining. Such as all kinds of cold and temperature kneading standard parts, precision forging gear, precision forging blade, precision forging shaft and so on; the weight of forgings is more and more large, with the presentation of large hydraulic press, the component of free forging exceeds one hundred tons, the outer diameter of die forgings also reaches more than 100 centimeters; the confusion degree of the forgings is also obvious because of the presentation of the multi parting surface. The hollow pipes with rifle line can be directly formed on the special forging equipment.
In general, forging processing is not a particularly complicated process. In the process of forging, two methods are generally used, one is the free forging one is a die forging, and the two methods have their own advantages.
Copper cleaning agent – how to rust
Copper parts are easy to oxidize and rust in the air, forming green copper and causing surface blackening. How can we solve this problem? Today, look, how does copper rust?
Copper cleaning agent – how to rust?
Copper rust cleaning purpose is to remove the surface oxide, the general cleaning agent is difficult to cause effective cleaning of copper rust, therefore, if you want to restore the bright surface of copper, the need for more targeted reagents.
Before and after polishing of copper parts
Copper chemical polishing agent is specially aimed at the removal of oxide on the surface of copper. It can remove oxide layer thoroughly, reduce the brightness of copper surface, and easy to operate.
Before polishing the copper, remember to clean the copper surface first, so as to remove the dust and oil from the surface. Oil cleaning can directly use degreasing agent, Tian Yue chemical environmental protection degreasing agent can effectively remove oil.
Copper adding chemical polishing agent
In addition to the completion of oil cleaning, rinse clean, the copper polishing can be carried out, copper chemical polishing method is very simple, is the need to polish copper directly into the copper polishing agent soak, soak in a long view of the degree of oxidation, generally do not need more than 1 minutes
-
- CNC Machining
-
- CNC Machining
-
- CNC turned
-
- CNC Machining
-
- CNC Turning
-
- CNC Milling service