1. Daily maintenance
1, after processing, clean the table in time and keep the table and machine clean and hygienic.
2. Regularly remove stains such as rails, rack, stone powder, sawdust and other stains to prevent interference due to debris interference.
3, clean up the engraving machine’s screw regularly to prevent the screw from sticking to the foreign objects. The screw determines the precision of the machine in the equipment, and the screw also plays an important role in the transmission process.
4, regularly clean up the electrical box, the biggest killer of circuit boards when dust.
Two. Oil
Some customers often neglect the problem of engraving machine oil injection because of their busy work. Some customers do not work for several days or even weeks because of seasonal reasons, and do not pay attention to the oil work. Our work experience tells us that the oil is very important in the maintenance process of the carving machine.
1, first clean up the guide rail and lead screw, and use cloth (without hair removal) to remove the oil dirt and material scraps on the guide rail and the lead screw. Because the temperature is low, you can add oil to the guide rail and the lead screw, and the best antifreeze oil is added.
2, the fuel cycle is two times a month, that is to add oil once every two weeks.
3, if the machine is not used for a long time, it should be regularly refueling empty to ensure the flexibility of the transmission system.
4. Slowly move back and forth after the oil is added to ensure that the lubricating oil can be evenly added to the guide rail and the lead screw.
Three. The problem of spindle
Many customers often forget to add water, especially in autumn and winter. Because the outside temperature is low, the spindle motor is too hot to feel.
1, the cooling water is the necessary condition for the normal work of the spindle motor. If the cooling water is dirty, it will cause serious damage to the motor, and ensure the cleaning of the cooling water and the normal work of the pump.
2, pay attention to the water level, the water cooling spindle motor must not be water deficient, so that the motor heat can not be exported in time.
3. Pay attention to the ambient temperature. Be careful to freeze the water tank and the water pipe because of the cold water temperature.
Four. About the maintenance of engraving machine and cutting machine in winter.
1. Ensure the ambient temperature of the operation room to ensure that the temperature is above 0 degrees.
2, check the standard temperature of refueling, at least the lowest temperature.
3, when the machine is not used, if the room temperature is low, it is best to pour water out of the water tank, prevent the freezing crack spindle and the computer abnormality of the safety protection of the pipe computer, especially for the computer connected to the engraving machine, and pay attention to the cleaning of the virus.
About the author