Skill 1:
The main shaft of CNC engraving machine, as a focus part, is mainly due to rust and blockage, which will cause the machine can not operate normally. The reason is that when we are in bad luck, the coolant in the coolant pipe is still left in it. In addition, the water also contains a large amount of elements. After high temperature, heavy water will gradually form. Heavy water contains a lot of impurities and precipitates After coming down, it will form dirt and form rust and blockage.
Therefore, the surface of motorized spindle should be coated with antirust oil and the cooling water should be changed regularly. And to prevent water temperature too high, but also to ensure the cleanliness of cooling water, if allowed, in case of spindle blockage.
Skill 2:
If the cooling system of the engraving machine is not grounded, the success rate will drop, the cold water head will fall off, and the service life will be greatly reduced. If the environment is severe, even the equipment deployment can not start things. In order to prevent such problems, we have to wash water tanks and waterways frequently, and control the temperature control points of temperature controlled water tanks fairly.
Skill 3:
If the fans and air ducts are not cleaned up, many smoke and dust inside will not be discharged. At this time, the lenses and laser tubes will also be seriously polluted. Finally, they will oxidize the electronic parts of the machine and cause the war is not good. This is why the response of engraving time is slow.
Skill 4:
Focus mirrors and mirrors should also be checked regularly. Because its frame is easy to heat, if not real-time disposal punishment, will make the appearance of oxidation, a long time will rust. Especially is the use of air pump and air compressor users, but also to regularly check the lens, so as not to cause irreparable place display.
Skill 5:
To make the engraving machine connected to the best state, the first thing is to make its power cooling connection unobstructed, but also fair, the current should be connected within 50%, on the contrary, it will cause the effect of increasing the blocking rate.
With the popularity of computer engraving machine in advertising logo industry, computer engraving machine is no longer just a symbol of strength, it has become a real batch of professional products.
The typical application of computer engraving machine in advertising logo industry includes: chest card processing, cutting crystal characters, carving three-dimensional characters, manufacturing sand table parts, processing light box components, processing organic products and carving relief characters and pictures.
The most important features of the above application are as follows:
·Products request precision, processing area is small, processing can only use small tools! The use of small tools to produce higher power, which requires equipment and processing skills, it is necessary to have professional characteristics!
·It is necessary to produce in batches! It is difficult to produce good planning benefits without batch production.
Operators with practical production experience all understand that it is easy to do a job, but it is difficult to work in batches without accidents! This is to test whether things are “comfortable to use and easy to use”!
The most prominent feature of professional CNC carving machine is: professional carving CAD / CAM software and CNC carving machine for professional and strict matching!
When a professional computer (CNC) engraving machine is used for batch processing, the professional engraving software can ensure that the operator can make a plan smoothly and generate a reasonable and efficient processing program; when the data is loaded and the tool is adjusted and started to work, the operator only needs to listen to the cutting sound of the cutter on time to determine whether the tool is worn or not, and to replace the cutter when necessary, which is not necessary When the processing is completed, if it is found that the processing in some areas does not meet the requirements, the operator can use the repair function on the machine to make up for it on site, and a batch of work is completed so fluently. It’s easy to work like this!
The low degree of specialization of the computer (CNC) engraving machine for the operator to plan an ambitious processing method – there are no unexpected conditions in the process! If this kind of condition exists, this kind of carving machine work is not a problem, but in fact, in the long-term batch processing, there is no accident. At this time, the work should be “not at hand”! The main performance is: tool adjustment is difficult to accurately locate and difficult to repair the deficiencies in the processing! This may be formed: low positioning accuracy of cutting tool affects the accuracy of products, and it is necessary to repeat processing to reduce processing power!
CNC engraving machine provides support in the following aspects to ensure that customers are comfortable in using “!
Taking the professional carving CAD / CAM software as the planning channel, the machining target of the central computer (CNC) for efficient small tool carving is mostly precise and disordered shape. Its appearance and processing method are different from the traditional CNC processing method. If there is no professional carving CAD / CAM function as support, it is difficult to achieve high efficiency in practical application. It is the same root and flesh and blood with the carving machine, which can be called “seamless integration”! For customers to use the carving machine at that time profit-making ability and future development space to provide strong support.
Using precision high speed spindle motor
High speed and precision spindle motor features high speed, high precision, low noise, low vibration and high-speed constant power, which ensure that the small tool can obtain high cutting line speed, adhere to high rotation accuracy and stable working shaft system, and can produce satisfied high-speed cutting force.
CNC carving skills based on equal cutting skills
Equal cutting is a cam professional skill for high-speed cutting with small tools. No matter how messy the processing area is, this skill is accurate
About the author