Corn milling cutter is suitable for cutting this kind of brittle plastic, and the cross section is very flat.
A milling cutter is a rotary cutter with one or more teeth for milling. When working, the cutter teeth cut off the allowance of the workpiece intermittently in sequence. Milling cutter is mainly used for machining plane, step, groove, forming surface and cutting workpiece on milling machine.
Cylindrical milling cutter
It is used for machining plane on horizontal milling machine. The cutter teeth are scattered on the circumference of the milling cutter, and can be divided into straight teeth and spiral teeth according to the tooth shape. According to the number of teeth, it can be divided into coarse teeth and fine teeth. Spiral tooth rough tooth milling cutter has less teeth, high tooth strength and large chip holding space, which is suitable for rough machining; fine tooth milling cutter is suitable for finishing.
Face milling cutter
Also known as disk milling cutter, it is used for machining plane on vertical milling machine, end milling machine or gantry milling machine. There are cutter teeth on the end face and circumference, and there are coarse teeth and fine teeth. There are three kinds of structures: integral, inlaid and indexable.
end mill
It is used for machining groove and step surface. The cutter teeth are on the circumference and end face, and can not feed along the axial direction. When the end mill has end teeth passing through the center, it can be fed axially.
Three side edge milling cutter
It is used for machining various grooves and step surfaces, with cutter teeth on both sides and circumference.
Angle milling cutter
There are two kinds of single angle milling cutter and double angle milling cutter for milling groove with definite angle.
Saw blade milling cutter
It is used for machining deep groove and cutting workpiece. There are many cutter teeth on its circumference. In order to reduce the conflict during milling, there is a 15 ′ ~ 1 ° offset angle on both sides of the cutter teeth. For the rest, there are keyway milling cutter, dovetail groove milling cutter, T-groove milling cutter and various form milling cutter.
T-shaped milling cutter
It is used for milling T-groove.
About the author